Installation Guide

2-1/8" Dia.

Bore

1" Dia.

Edge Bore

2-1/4"

1/8"

Deep

2-3/8"

2-3/4"

Door Prep. Active

Optional Thru Bolts

Latch

Align Plates

Installation Guide— Non-Keyed Plates : Lever

Rev. 11/17/05

IN4-NKEYPLTSLVR

Mount Plates

After lock has been installed tighten set screw with

allen wrench.

Align sideplates using edge guide.

Drill pilot holes, install wood screws or

thru bolts as required (both types are

provided).

Edge Guide

Provided

After lock has been installed

tighten set screw with allen

wrench.

Thru bolts (provided) may be used on hollow doors

instead of wood screws (also provided).

Dummy

IMPORTANT: Lever location on the sideplate (top, middle, or bottom) varies depending on style. Determine proper orientation before drilling holes.

PAGE 1
Installation Guide— Non-Keyed Plates : Lever IMPORTANT: Lever location on the sideplate (top, middle, or bottom) varies depending on style. Determine proper orientation before drilling holes. 1/8" Deep Optional Thru Bolts Dummy Door Prep. Active 2-3/8" or 2-3/4" 2-1/4" 1" 2-1/8" Dia. Bore 1" Dia. Edge Bore Latch After lock has been installed tighten set screw with allen wrench. Align Plates Mount Plates Edge Guide Provided After lock has been installed tighten set screw with allen wrench.