Specification Sheet

Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: [phone] Fax: [phone] www.emtek.com
Door Thickness Specifications
Outside Trim
Annapolis Single and Two Point
Annapolis Two Point Single Cylinder
Part# 5318
Inside Trim
Standard Door Thickness:1 ¼- 1 ¾”
Standard Components:
• Single Cylinder Tailpiece
• Inside Passage Half Spindle
• 1” Wood Screws
• Threaded Tubes & Machine Screws
Supplied upon request for Hollow-Core Doors
• 2 ¼” Deadbolt Mounting Screws
• Full-Lip Strike Plate
• Deadbolt Strike Plate
Extended Door Thickness: 1 ¾”- 2 ¼”
Extended Components:
• Long Single Cylinder Tailpiece
• Long Inside Passage Half Spindle
• 1” Wood Screws
• Threaded Tubes & Machine Screws
Supplied upon request for Hollow-Core Doors
• 2 1/2” Deadbolt Mounting Screws
• Extended Full-Lip Strike Plate
• Deadbolt Strike Plate
Extended Door Thickness: 2 ¼”- 2 ¾”
Extended Components:
• Extra Long Single Cylinder Tailpiece
• Extra Long Inside Passage Half Spindle
• 1” Wood Screws
• Threaded Tubes & Machine Screws
Supplied upon request for Hollow-Core Doors
• 3” & 3 ½” Deadbolt Mounting Screws
• Extended Full-Lip Strike Plate
• Deadbolt Strike Plate
5-1/4”
6-3/8”
2-1/8”
9-3/4”
2-4/5”
6-3/8”
2-1/8”
9-3/4”
2-4/5”
5-1/2”
2-3/4”
2-3/4”
6-5/8”6-5/8”