Specification Sheet

20
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: [phone] Fax: [phone] www.emtek.com
Standard Door Thickness: 1¾”
Standard Components:
• 1 ½” Threaded Cylinder
• 2” Long Spindle
• 2” Top Rosette Screw
• 1 ½” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Door Thickness: 1 7/8”- 2 ¼”
Extended Components:
• 1 ½” Threaded Cylinder
• 2” Long Spindle
• 2 ½” Top Rosette Screw
• 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 5⁄8”
Extended Components:
• 1 ¾” Threaded Cylinder
• 2 ¼” Long Spindle
• 2 ½” Top Rosette Screw
• 2” Bottom Rosette Screw
• Extended Thumbpress
• Extended Strikeplate
• 2 ¾” TD Reqires 2” Threaded Cylinder
Door Thickness Specifications
Rectangular Monolithic Mortise
Part # 3325
Rectangular Sectional Mortise
Part # 3324
16¼”
1½”
23⁄8”
3”
2 13⁄16”
4¾”
3”
2 3⁄16”
16¼”
10”
213⁄16”
2¼”
3”
21⁄8”
10”
213⁄16”
37⁄16”
45⁄16”
Additional Dimensions: (Part # 3324, 3325)
• Exterior Projection is 31⁄8”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 13⁄4”
• Clearance between door & grip is 13⁄4”
• Plates thickness: 1⁄2”
Standard interior trim
Part # 3324/3325*
* Available in Lever By
Lever/ Knob by Knob
Mortise Entrance
Handlesets. Same
dimensions as interior
trim of standard mortise
entrance handlesets.
Entrance Handlesets - Bronze Rectangular Sectional & Monolithic Mortise
Same dimensions for dummy function