Installation Sheet

IN4-SNGHOOK REV 17A 05-9-2017
Hook Installation Instructions
Mark hole locations
Install Mounting Plate
Install trim plate and hook
Install Screw Anchors
1
3 4
2
Use mounting plate as a template
to mark location of screw holes.
Use the marks as a guide to
install three screw anchors
(provided) into the wall.
Place mounting plate on top of the Screw
Anchors. Secure using screws provided.
Slip trim plate and hook on the mounting plate
stud. Tighten set screw at the base of post with
Allen Wrench provided.
Trim Plates vary depending on style