Installation Sheet

IN4-TOLPAPHBAR REV 17A 05-8-2017
Toilet Paper Holder Installation Guide
Mark Hole Locations
Install Mounting Plate
Install Trim Plate
Tighten Set Screw
Install Screw Anchors
1
3
4
5
2
Using the mounting plate, mark the hole locations.
Use a screw driver to install three
screw anchors into the wall
Secure mounting plate using screws provided
Tighten set screw at base of post with Allen
Wrench provided. Holder may be mounted
vertically or horizontally.
Trim Plates vary depending on style
Slip trim plate over the threaded stud on the
mounting plate. Thread TP holder onto the
threaded stud until tight against trim plate.