Installation

Installation Guide - Narrow Modern Rectangular and Oval Pocket Mortise Lock - KEYED

IN4-NMPDMOR-KYD REV. 19A 08/05/19

See template for door prep

specications

1. Thread Drive Bar Cylinder

4. Tighten Key Cylinder

3. Install Outside Plate and Thread Key Cylinder

Note: Drive Bar Socket must

be in the 12 o’ clock position

as shown.

Install Key Cylinder by

threading it clockwise onto

lock body plate.

Cylinder Key

Note: Notches on cylinder must be

parallel with the horizontal plane

when fully screwed into lock body.

Note: Key Cylinder notches must

be parallel with the horizontal

plane when fully screwed into

lock body.

Use Cylinder Key to thread Drive Bar

Cylinder clockwise on interior side of

door.

2. Install Lock Body

Outside

Tighten locking screw

to engage notches on

cylinder

6. Install Trim Plate

5. Mount Inside Plate

Door Jamb Prep.

See template for door jamb

prep specications

PAGE 1
Installation Guide - Narrow Modern Rectangular and Oval Pocket Mortise Lock - KEYED 1. Thread Drive Bar Cylinder 3. Install Outside Plate and Thread Key Cylinder Use Cylinder Key to thread Drive Bar Cylinder clockwise on interior side of door. Outside Note: Drive Bar Socket must be in the 12 o’ clock position as shown. Install Key Cylinder by threading it clockwise onto lock body plate. Note: Key Cylinder notches must be parallel with the horizontal plane when fully screwed into lock body. 4.