Installation

Installation Guide - Narrow Modern Rectangular and Oval Pocket Mortise Lock - Privacy
IN4-NMPDMOR-PRIV REV. 19A 08/05/19
See template for door prep
specications
Oval trim shown
1. Thread Drive Bar Cylinder
Inside
4. Tighten Key Cylinder
3. Install Inside and Outside Plates
Note: Drive Bar Socket must
be in the 12 o’ clock position
as shown.
Cylinder Key
Note: Notches on cylinder must be
parallel with the horizontal plane
when fully screwed into lock body.
Use Cylinder Key to thread Drive Bar
Cylinder clockwise on interior side of
door.
2. Install Lock Body
Outside
Tighten locking screw to engage notches on cylinder
5. Install Trim Plate Door Jamb Prep.
See template for door jamb
prep specications
Align Passage/Privacy button with Thumb-turn
spindle and secure trim pates to door.