Installation

Installation Guide - Modern Pocket Door Mortise Lock - Privacy

IN4-MRPCKTMRTS -PRIV REV.16B

See template for door prep

specications

1. Thread Drive Bar Cylinder

Inside

4. Tighten Key Cylinder

3. Install Inside and Outside Plates

Note: Drive Bar Socket must

be in the 12 o’ clock position

as shown.

Note: Notches on cylinder must be

parallel with the horizontal plane

when fully screwed into lock body.

Install Drive Bar Cylinder by threading it

clockwise on interior side of door.

2. Install Lock Body

Outside

Tighten locking screw to engage notches on both cylinders

6. Install Trim Plate Door Jamb Prep.

See template for door jamb

prep specications

PAGE 1
Installation Guide - Modern Pocket Door Mortise Lock - Privacy 1. Thread Drive Bar Cylinder Install Drive Bar Cylinder by threading it clockwise on interior side of door. 3. Install Inside and Outside Plates Outside Inside Note: Drive Bar Socket must be in the 12 o’ clock position as shown. 4. Tighten Key Cylinder Tighten locking screw to engage notches on both cylinders Note: Notches on cylinder must be parallel with the horizontal plane when fully screwed into lock body. 2. Install Lock Body 6.