Installation

Installation Guide - Modern Pocket Door Mortise Lock
Outside
IN4-MRPCKTMRTS REV.16A
See template for door prep
specications
1. Thread Drive Bar Cylinder
Inside
5. Tighten Key Cylinder
3. Install Inside and Outside Plates
Note: Drive Bar Socket must
be in the 12 o’ clock position
as shown.
Note: Notches on cylinder must be
parallel with the horizontal plane
when fully screwed into lock body.
Install Drive Bar Cylinder by threading
it clockwise onto lock body plate, on
interior side of door.
2. Install Lock Body
Outside
Install Key Cylinder by threading it
clockwise onto lock body plate.
4. Thread Key Cylinder
Tighten locking screw to engage
notches on both cylinders
6. Install Trim Plate Door Jamb Prep.
See template for door jamb
prep specications
Key Cylinder notch must be in
the horizontal position when
fully screwed in lock body.