Instruction Manual

Using the EJ-T with a wireless microphone: Want the freedom of being able to move
around a room while broadcasting the telephone conversation, or getting others involved
by using a traveling microphone. The EJ-T can be used with a wireless microphone
being substituted for the telephone handset. The basic set-up of the EJ-T would not
change, except the handset for the telephone will need to be replaced with the wireless
receiver. This will require a custom cable to be manufactured with an RJ-6 plug on one
end of the cable, and a mating jack for the wireless receiver output connector on the other
end of the cable. Contact Emtech for pricing on a custom cable for the wireless receiver.
EJ-T Specifications:
Inputs – RJ-11 Modular Telephone Jacks
Output – 3.5mm Mono Jack
Output Signal – Transformer balanced line level
Frequency Response – 20Hz to 20kHz
Power Requirement – 9Vdc @ 100mA (provided via wall transformer)
Enclosure – Steel case with black powder coat finish
Dimensions – 3.75”L X 2.5”W X 1.25”H
Weight – 8 oz.
Warranty:
Emtech Electronics, Inc. warrants the Model EJ-T for a period of two years, from the
original date of purchase, against defects in parts and workmanship. If a defect occurs,
the unit will be repaired or replaced, at our option, free of all charges if delivered prepaid
to the factory. Warranty does not extend to finish, appearance, abuse or defects due to
the misuse or operation under other than specified conditions, nor does it extend to
incidental or consequential damages. Repair by anyone other than Emtech will void the
warranty.