User Manual

4
11. Hum Switch – connects the shield ground from inputs to output allowing a
selection for lowest hum pick up.
12. Volume Control – controls signal volume in any of 4 signal directions:
a) Inputs to Microphone Out
b) Phone In to Microphone Out
c) Phone Input to “Audio Input (Output) No. 4” connector (used for
recording)
d) Inputs to Phone Out
13. Output Cord to Microphone Input (XLR) – buffered isolated microphone level
signal out to: microphone input jack of the sound system, microphone wall
jack, existing P.A., sound reinforcement system, or house sound system.
14. Basic Use Instructions Operations & Examples – quick reference operations
Examples displayed on front of EJ-10’s.