User's Manual

Product user manual & operation description
EMV3000
Document number: 915-11135-01 Page 18 | 26
4 INSTALLATION TOOLING LIST
This section is a summary of the most-used tools necessary to install the EMV3000. These tools should
be at the technician’s disposal to carry out normal installation work.
Equivalents of this tooling can also be used by the installer/technician, this depending on availability
and corresponding with the tooling technical specifications.
Supplier references in this tooling list are subject to change and must be verified by the installer before
purchase and/or use during installation.
The list provided is for references purposes only and may be extended depending on the nature of the
job to be done.
Note: The correct use of the proper tooling contributes to the quality of the work executed.
The tooling mentioned in this section is not part of Emsyscon’s scope of delivery.
N°
Description
Image
Reference
1
Drilling machine
T01
1
Torx screwdrivers or bit set
(range size T10 – T30)
T02
Table 7: Tooling list