User's Manual

Product user manual & operation description
EMV3000
Document number: 915-11135-01 Page 11 | 26
1.8 Used symbols
A number of symbols are repeatedly used in this manual. Their meaning is indicated below.
Symbol
Description
Meaning
Attention!
Pay particular attention to the work to be done.
Read carefully
Read this advice.
Time
Realistic time indication taken up by these activities.
Special tooling
Use the specified tooling.
Danger: electricity
The components may contain electrically charged or live elements.
Static electricity
Watch out for static discharge. Obey the proper handling procedures!
Glue
Respect the instructions and the recommended adhesive to obtain
perfect bonding of the parts.
Consult the manufacturer’s datasheet of the particular adhesive for
detailed handling instructions.
Table 5: Used symbols
1.9 General guidelines
◼ Emsyscon recommends to perform an incoming inspection of all parts that will be used during the
firmware update of this product. Also sub-assemblies, made by subcontractors, should be checked
carefully.
◼ Incoming inspection of the parts will be performed based on the documents and product data below
(contact Emsyscon for further instructions if not available):
 Supplier part numbers and technical specifications/datasheets
 Mechanical drawings
 Cable drawings
◼ Read all sections carefully before starting the installation. The sections are not necessarily organised
in a logical workflow.
◼ All UOM (unit of measurement) are according to the metric system (metres, kilogram…) unless
specified otherwise in this document.