Spec Sheet
Natural Stone
338
1”
2”
2”
2”
1”
1”
4”
5”
6”
7”
6”
6”
6”
4”
3”
8”
12”
8”
Wainscot
White Beige Noce CharcoalGray
Stone Veneer 160 kg/cm² (2,273 psi)
Stone Veneer 31.7 kg/cm (450 psi)
Stone Veneer 21.1 kg/cm (300 psi)
Stone Veneer 3.52 kg/cm (50 psi)
Stone Veneer 50 cycles (50 cycles)
Stone Veneer < 2 g/cm³ (125 lb/cu ft)ASTM C 567
Stone Veneer < 15% < 15%
Stone Veneer 35 a 45 kg/m² (7.2 to 9.2 lb/sq ft)
ASTM C 190
ASTM C 482
ASTM C 192
ASTM C 348
ASTM C 67
UBC 15-5
PHYSICAL / CHEMICAL
PROPERTIES STANDARD PRODUCT
Stone Veneer 600 mm (23.6”)
Stone Veneer 15 a 100 mm (0.6” to 3.9”)
Portland Cement, Mineral Aggregates, Iron Oxide Pigments,
Concrete Additives. (DOES NOT CONTAIN LEAD)
Zero
Color becomes an integral part of the product during manufacturing
process. Existing installations demonstrate that no significant
changes in color are shown through several years outdoors.
The information contained herein is offered in good faith and it is understood that it is precise and accurate. This information should not
be used in substitution
of client’s own tests, in order to ensure the safety of these products and their accordance with an intended use.
Thickness of the product may vary, but isolating properties of
stone veneer of an average thickness is about the same of a
common 6” masonry brick.
Tensile Strength
Bond Strength
Flexural Strength
Compressive Strength
Water Absorption
Freeze / Thaw Resistance
Average Density
Color
Thermal Properties
Average Weight
Flamespread or Smoke Developed
Composition
Maximum Dims (Length)
Average T
hickness
SERIES
American Rockies
American Rockies
Border Trail
Border Trail
Cascade Mountain
Cascade Mountain
Pikes Peak
Pikes Peak
Ridge Crest
Ridge Crest
Cinderblock
Woodstone
Field
Corner
Field
Corner
Field
Corner
Field
Corner
Field
Corner
Field
Field
4”
4”
3”
10”
36”
30mm
30mm
20-60mm
60mm
25mm
10-30mm
20-50mm
40mm
40mm
40mm
14-17mm
25mm
10.76
8.2
9.69
7.54
10.76
6.56
9.69
5.9
10.76
8.2
N/A
N/A
SF
LF
SF
LF
SF
LF
SF
LF
SF
LF
SF
SF
8”
12”
9”
12”
4”
12”
4”
6”
5”
10”
20”
16”
21”
19”
12”
16”
18”
10”
20”
16”
Engineered Stone
ENGINEEREDSTONE
WIDTH THICKNESS
Example:
Corners:
3.93”
(100mm)
1.18”
(30mm)
Minimum 7.87” (200mm) Maximum 19.68” (500mm)
SF/BOXUOMLENGTH
min minmax max