SDS

Safety Data Sheet AST Hi-Acrylic

5. Fire-ghting Measures

5.2 FLAMMABILITY: Slight. Material can support an open ame or smoldering ignition. The foam can

melt while burning which can contribute re to spread.

5.2 FLASH POINT: Unknown.

5.3 AUTO-IGNITION TEMPERATURE: Unknown.

5.4 EXTINGUISHING MEDIA: Large volumes of water, or ABC chemical may be appropriate for initial control or

small volumes of impregnated foam.

.5 HAZARDOUS DECOMPOSITION PRODUCTS:

Carbon di/mon oxides will be formed as well as other noxious and toxic fumes

upon combustion – do not breath combustion products.

6. Accidental Release Measures

If material is unusable pick up pieces and dispose of in accordance with local regulations; material and all components are non-

toxic and normal landll will most often be acceptable.

7. Handling and Storage

Store in original packaging below 35°C. There are no special handling instructions.

8. Exposure Controls / Personal Protection

8.1 RESPIRATORY PROTECTION: Not required

8.2 EYE PROTECTION: Not required

8.3 SKIN PROTECTION: Gloves of any material are suitable if desired, but not required. No other protection is required.

9. Physical and Chemical Properties

9.1 APPEARANCE: Dark grey / charcoal colored foam reel supplied on a cardboard core.

9.2 ODOR: Slight characteristic odor.

9.3 PERCENT SOLIDS BY WEIGHT: 100%

9.4 PHYSICAL STATE: Solid

9.5 PERCENT VOLATILE: <1% wt/wt

9.6 DENSITY: 0.4g/cm3

9.7 DECOMPOSITION: > 300°C

9.8 SOLUBILITY IN WATER: None

Revision Date May 31, 2015