User manual

Specification
• Board Format
PCIe x4 low profile card, 68.9mm x 167.6mm
PCIe bus master with scatter gather DMA providing maximum data rate of
480MB/s
• Connectors
One DVI-I Type connector
• Maximum Sample Rate:
170 Mpixels per second analog RGB or 165MHz DVI
• Video Sampling:
Analog RGB: 24 bits per pixel / 8-8-8 format
• Video Capture Memory:
32MB per channel (updated in real time). Triple buffered
• Analog RGB Mode Support:
640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920 x 1080,
2048 x 1536, Custom modes
• DVI Single Link Mode Support:
640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920 x 1080,
1920 x 1200 and Custom modes
• HD Modes
1080p, 1080i, 720p, 567p, 480p and 480i using a Component HD connector
(HDCP not supported)
• Input Mode Detection:
Automatic detection of input modes in hardware enabling the tracking of mode
changes in the source signal
• Pixel Transfer Formats:
RGB: 5-5-5, 5-6-5 or 8-8-8 pixels
YUV 4:2:2 modes: UYVY, YUY2 or YVYU
MONO: 8bit
• Update Rate:
User defined, captured frame rate will match the source providing max data
rate (480MB/s) is not exceeded.
Triple buffered to eliminate tearing artifacts
• Video Format Options:
Analog RGB plus HSync and VSync (5 wire)
Analog RGB with Composite Sync (4 wire)
Analog RGB with Sync on Green (3 wire)
DVI Single Link
• Operating System Support
Windows® XP, Windows® Vista, Windows® Server 2003, Windows® Server
2008 and Windows® 7 (x86 and x64 Operating Systems)
• Power Requirements
Max current at +3.3V – 0.25A
Max current at +12V – 0.5A
Max power – 6.8 Watts
• Operating Temperature:
0 to 35 deg C
• Storage Temperature:
-20 to 70 deg C.
• Relative Humidity
5% to 90% non-condensing
• Analog Input Range:
Min 0.5Vpp Max 1.0Vpp
• Input Offset:
+/-2V
• Hsync:
15kHz - 110kHz
• Vsync:
No hardware limits, typically 25Hz - 200Hz for real signals