User manual

Specification
Board Format
64 bit, up to 66MHz PCI-X, half size plug-in card 105mm x 170mm.
PCI bus master with scatter gather DMA providing maximum data rate of
480MB/s
Connectors
Two DVI-I Type connectors
Maximum Sample Rate:
170 Mpixels per second analog RGB or 165MHz DVI
Video Sampling:
Analog RGB: 24 bits per pixel / 8-8-8 format
Video Capture Memory:
64MB (updated in real time). Triple buffered
Analog RGB Mode Support:
640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920 x 1080,
2048 x 1536, Custom modes
DVI Single Link Mode Support:
640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920 x 1080
Custom modes
HD Modes
1080p, 1080i, 720p, 567p, 480p and 480i using a Component HD connector
(HDCP not supported)
Input Mode Detection:
Automatic detection of input modes in hardware enabling the tracking of mode
changes in the source signal
Pixel Transfer Formats:
RGB: 5-5-5, 5-6-5 or 8-8-8 pixels
YUV 4:2:2 modes: UYVY, YUY2 or YVYU
MONO: 8bit
Update Rate:
User defined, typically up to 60 frames per second, limited by available PCI-X
or PCIe bandwidth
Triple buffered to eliminate tearing artifacts
Video Format Options:
Analog RGB plus HSync and VSync (5 wire)
Analog RGB with Composite Sync (4 wire)
Analog RGB with Sync on Green (3 wire)
DVI Single Link
Operating System Support
Windows® XP, Windows® Vista, Windows® Server 2003, Windows® Server
2008 and Windows® 7 (x86 and x64 Operating Systems)
Power Requirements
Max current at +3.3V – 0.5A
Max current at +5V – 1.7A
Max power - 10 Watts
Operating Temperature:
0 to 35 deg C
Storage Temperature:
-20 to 70 deg C.
Relative Humidity
5% to 90% non-condensing
Analog Input Range:
Min 0.5Vpp Max 1.0Vpp
Input Offset:
+/-2V
Hsync:
15kHz - 110kHz