User manual

EMS SYSTEM 5000
USER MANUAL, ISSUE 2.4 – 19/11/09
19
9.5 Enabling/Disabling Brigade Relay:
To Enable or Disable the Brigade Relay turn the control key switch to the “ON” Position
and Press the “0” key. Scroll down to the bottom of the Options Menu using the “∇”
button, until highlighting “>Fire System Options<”. Press the “YES” key. Press the “∇”
button until highlighting the “>ARE Disable <” option. Press the “YES” key. Then press
the “YES” key again to change from “ENABLED” TO “DISABLED” alternately.
Then having selected the desired option, press the “NO” key three times to return to the main display.
9.6 Printer Options: -
To enter the Printer options from the main display, put the control key switch into the
“ON” position. Press the “0” key. Now using the “∇” button, scroll down to the last
option, “>Fire System Options<”. Now press the “YES” key. Then scroll down, pressing
the “∇” button to the last option, “>Print Options <”. Now, press the “YES” key.
Now having reached the “Print Options”, press the “YES” key to turn the Printer “ON” or
“OFF”. Whilst the printer is set to “ON”, press the “∇” button, then press the “YES” key
to change the print event between “FIRE” or “ALL”.
This depends on whether the printer is required to print All events or just any Fire
Events. Once suitably configured, press the “NO” key three times to return to the main
display.
ARE / Brigade ENABLED
Push YES to change
Push NO to escape
Push YES / NO
ARE / Brigade DISABLED
Push YES to change
Push NO to escape
Push YES / NO
| * Print Options * |
> Printer is ON <
| Print Events ALL |
Yes = Select 12:00
| * Print Options * |
| Printer is ON |
> Print Events FIRE <
Yes = Select 12:00