User manual

EMS SYSTEM 5000

USER MANUAL, ISSUE 2.4 – 19/11/09

8.2 Fire (Networked Device):

When a device on a Networked Control Panel has activated a Fire Alarm, the following

alarm screen will be shown: -

The above display shows that a Fire Alarm has been generated from Device 27, in Zone

1 on Panel 4.

8.25 Pre-Alarm:

When a Pre-Alarm event occurs the text on the display changes to show: -

The above display shows that Device 27 has entered a Pre-Alarm event, in Zone 3.

8.3 Tamper:

When a device generates a Tamper Alarm, the display will change to show: -

The above shows that Device 5 has generated a Tamper Alarm in Zone 1.

8.35 Fault Event:

When a Fault Event occurs the text on the display changes to show: -

01 FAULT TOT 01

RS SECOND FLOOR

MAIN CORRIDOR

ZONE 04 DEVICE 056

01 FIRE ALARM TOT 01

CP THIRD FLOOR

GAMES ROOM

ZONE 01 P:04 DEV 027

01 PRE-ALARM TOT 01

SS FIRST FLOOR

MAIN BEDROOM

ZONE 03 DEVICE 027

01 TAMPER TOT 01

CP GROUND FLOOR

ENTRANCE LOBBY

ZONE 01 DEVICE 005