Installation manual

EMS 5000 FIREPOINT

INSTALLATION MANUAL, ISSUE 3.0 – 16/08/10

13. Controller Information

TECHNICAL INFORMATION FOR THE 5000 CONTROLLER

Dimensions: 330mm x 450mm x 116mm

Operating Frequencies: VHF – 173.2 MHz – 173.5MHz (receiver)

UHF – 458.5 MHz – 459.5 MHz (transmitter)

Operating Temperature: -10 to 55 degrees C

Humidity: Up to 75% non-Condensing.

Channel Spacing: 25 kHz

Output Transmitter Power: 0.75W (500 mW) (+ 27DBH)

Supply: 240v 50 Hz

Current Consumption: 260mA in standby

Operating Voltages: 24v DC nominal

Battery space: 2 x 12volt 9Ah batteries (not supplied)

EMS only recommend: Panasonic Model No:

UP-RW1245P1 or a battery of equivalent

specification

Inputs: 1 x 27v DC

Outputs: 2 x 0.25amp 24v DC sounder outputs

2 x auxiliary fire relays

2 x auxiliary fault relays

1 x RS 485 serial port

1 x RS 232 serial port

Standards: Designed to comply to BS5839 part 4 and

EN54 - 2

Recommended battery

replacement intervals:

Standby 9Ah batteries – 2 years

Lithium clock and RAM batteries – 5 years

(Re-order no – 5-5812)