User manual

EMS Dr. Thomas Wünsche

CG-ARM7/D/ECAN/CAN Gateway

2.3.2 Programming the Device

CG-ARM7/D/E is programmed by means of the configuration

software. It offers the possibility to configure the gateway via the

USB interface. An USB cable has to be used to connect to the host

PC.

The "Program Settings" have to be set to:

• CG-ARM7

• Program configuration

• A configuration file

The "Interface Settings" have to be set to:

• Use RS232 interface

• The used PC serial interface port

• The serial baudrate used by the CG-ARM7/D/E device

Within the "Device Settings" the serial number of the CG-ARM7/D/E

has to be set. The serial number can be found on the label of the

device.

After all settings are made a click on the "Process" button starts the

download. Do not remove power from the device until the process

has finished.