User manual

3 Technical Data
3.1 Pin assignment
Pin assignment of the multiway connector
Pin Signal Description
1 +24V +24 Volt power supply
2 GND Ground*
3 GND Ground*
4 CAN1-H CAN1-High Buswire
5 CAN1-L CAN1-Low Buswire
6 GND Ground*
7 CAN2-H CAN2-High Buswire
8 CAN2-L CAN2-Low Buswire
* Internal connected
Pin assignment RS232
Pin Signal Description
1 not connected
2 RxD Receive signal
3 TxD Transmit signal
4 not connected
5 GND Ground
6 not connected
7 RTS not used
8 CTS not used
9 not connected
CG-ARM7/RMD CAN/CAN - Gateway
User Manual 15