User manual

password = 80 07 05 AF D6 B0 D1
# Security: normal
password = 00 07 05 AF D6 B0 D1
fil routing
The routing settings contain the filtering and
mapping rules for a single identifier or ranges
of identifiers. Only stated identifier or ranges of
identifiers are transmitted and, if existent, the
adequate mapping rule is applied. All incoming
messages with identifiers to which no rule ap-
plies are ignored (defined program identifiers
excepted). Additionally the frame format must
be set within the filtering rules.
Key structure:
Different from the basic keys, the routing key is
constructed in a more complex way. The key
specifies 3 criteria:
[inff] fil channel [outff]=
...
1. inff: Defines the frame format for incoming
messages.
The frame format for incoming messages spe-
cifies whether the filtering rule is applied to
standard or extended messages. If inff is set to
‘s’ standard frame format is specified. When
set to ‘x’ the extended frame format is defined.
2. channel
: Defines the channel number.
The channel number specifies whether the fil-
tering rule is applied to incoming messages on
CAN channel 1 or on CAN channel 2.
CAN/CAN - Gateway CG-ARM7/RMD
8 User Manual