User's Manual

EMS Wireless Operator’s Manual
EkoLite II
18
Figure 4. EkoLite II Remote
The standard EkoLite Remote has a self-contained antenna. Optionally, an SMA(f)
connector may be specified so an external antenna may be used. In this case, the
internal antenna is not installed at the factory. Also, internal 1:2 or 1:4 power
splitters may be specified and factory installed inside the remote unit so multiple
antennas can be used. The outputs from these splitters are SMA(f) connectors on
the back of the remote unit.
1.2.4 Optional Components
The components listed above are mandatory for any EkoLite II system
deployment. For added safety, flexibility, and convenience to the installer,
several optional components are also offered. The following sections describe
some of the more frequently used optional components.
1.2.4.1 AC Power Supply
There are two power supply offerings available from EMS Wireless which are
specifically designed for deployment in EkoLite II systems. The AC Supply is
shown in Figure 4. It has 16 outputs for EkoLite II systems.