User's Manual

EMS Wireless Operator’s Manual

EkoLite II

service technician is warned, however, to take precautions which include not

looking directly into the fiber connector or the fiber which is connected to the

fiber connector before it is connected to the fiber optic receiver. The light

emitted from the fiber optic connector or any fiber connected to the

connector is invisible and may be harmful to the human eye. Use either an

optical power meter or an infrared viewer or fluorescent screen for optical

output verification. All handling precautions as outlined by the FDA and

ANSI Z136.2 and other authorities of class IIIb lasers must be observed.

Do not attempt to modify or to service this Product. Contact the EMS

Wireless Customer Support Department for a return authorization if service

or repair is necessary.

Disclaimer

Every attempt has been made to make this material complete, accurate, and

up-to-date. Users are cautioned, however, that EMS Wireless Inc. reserves

the right to make changes without notice and shall not be responsible for

any damages, including consequential, caused by reliance on the material

presented, including, but not limited to, typographical, arithmetical, or listing

errors.

INVISIBLE LASER RADIATION

AVOID DIRECT EXPOSURE TO BEAM

PEAK POWER 30 mW

WAVELENGTH 1300/1550 nm

CLASS IIIb LASER PRODUCT

THIS PRODUCT COMPLIES WITH 21 CF

PTER I SUBCH

PTER J

DANGER