User's Manual

EMS Wireless Operator’s Manual
EkoLite II
5
Electrostatic Sensitivity
ESD = ELECTROSTATIC DISCHARGE SENSITIVE DEVICE
Observe electrostatic precautionary procedures.
Semiconductor laser transmitters and receivers provide highly reliable
performance when operated in conformity with their intended design.
However, a semiconductor laser may be damaged by an electrostatic charge
inadvertently imposed by careless handling.
Static electricity can be conducted to the laser chip from the center pin of the
RF input connector, and through the DC connector pins. When unpacking
and otherwise handling the transmitter, follow ESD precautionary
procedures including use of grounded wrist straps, grounded workbench
surfaces, and grounded floor mats.
If You Need Help
If you need additional help in installing or using the system, need additional
copies of this manual, or have questions about system options, please
contact:
EMS Wireless Customer Support
2850 Colonnades Court
Norcross, Georgia 30071 U. S. A.
[phone] x5310
Service
Do not attempt to modify or service any part of this product other than in
accordance with procedures outlined in this Operator's Manual. If the
product does not meet its warranted specifications, or if a problem is
encountered that requires service, notify the EMS Wireless Customer
Support Department. Service will be rendered according to the EMS Wireless
warranty and repair policy. The product shall not be returned without
contacting EMS Wireless and obtaining a return authorization number from
the Customer Service Department.