User's Manual

1.0 Unpacking:
Carefully remove the EkoLite II hub(s), remote(s), and all supplied accessories
from the box. The following items should be included as a minimum with each
EkoLite II shipment.
• Hub(s)
• Remotes(s)
• User manual (this document)
• Software Command Reference Manual
• AC Power supply (optional)
• Other accessories, such as fiber optic cable, coaxial jumper cables, server
(remote) antennas, etc., as determined by the particular system design.
2.0 Additional Parts Needed for Installation:
The customer must provide the following equipment for installation:
• Optical connector cleaning kit: cotton swabs, alcohol, dust-free compressed
air
• Crimping tool, mating connectors, and pin crimps for the DC electrical
connectors and alarm outputs at the Hub.
• Philips screwdriver
• Personal computer or laptop with terminal program such as HyperTerminal.
• Volt Meter
Not essential, but useful for diagnostics are the following equipment:
• RF power meter
• Optical power meter
• RF Spectrum analyzer
• Signal generator