User's Manual

EMS Wireless
EkoLink Plus Fiber Optic DAS
2
Appendix A: Installing the Wireless Modem into an EkoLink Plus
Items Needed:
Wireless Modem
Modem Interface cable
Coaxial cable
EkoLink Plus Repeater
Steps:
1. Remove interface from packaging material.
2. Plug DB9 Female connector into DB9 Male found on the Interface Module.
3. Connect the coaxial cable to the wireless modem and the other end to the the uplink
duplexer coupling port
4. Plug modem interface cable into wireless modem.
5. Turn on modem. (The modem will be powered by the EkoLink Plus power supply
and will supply charging power to the modem battery if applicatble through the
interface cable as long as there is power to the power supply.)
6. Mount the modem in the designate location.
7. Power Cycle the EkoLink Plus.