User's Manual

IM 610179-1, Rev 02
08/25/06
Page 25
Setup the EkoMini – Auto Setup Page
Refer to the EkoMini manual for the steps you need to take before attempting to set up the
EkoMini for operation. After the EkoMini has been connected to power, the donor and server
antenna port to port to port isolation has been verified, the antenna port return loss has been
verified then it’s safe to setup the EkoMini. On the Main Page hit the Auto_Setup link. You’ll the
Automatic Setup Page. Press start and wait for 3 minutes. The repeater will set its gain to the
proper level for operation.