User's Manual

Preliminary Document
CI Wireless Inc. 11/19/99 8
IMPORTANT: Before performing maintenance on any module, make sure power is OFF.
System Set Up Instructions:
-Apply Power after setting user switches and unit will automatically set up.
-Set Band Switches to desired Band (Preset at Factory to A or D depending on the Models
BW 15 or 5 Mhz)
-Set UL gain offset as desired (Preset to 4 dB offset)
-Set DL RF Output Power to desired maximum Level (Factory Preset to full Power, 20 dBm
Composite)
-Set Protocol selection Switch (Factory Preset to All Other, SW 5-OFF)
-For set up of optional remote alarming refer to software set up instructions.