Operator's Manual

Installation of the CDR812 CI Wireless Inc.
MirrorCell Select CDR812 Manual
7-8
Rev. X1
6. Change the default Username and Password. Each Username and Password can
have a maximum of eight characters. For example, to change the second Username
and Password, enter the following two commands.
SET UID 2 [newname] <enter>
SET PWD 2 [password] <enter>
7. To see the current status of repeater setup and configuration, type STATUS <enter>.
See Figure 18 for a Status screen display. Note that, even if parameters shown on
the screen are changed, the screen readout remains the same until STATUS is
retyped.
8. Next, set the channel frequency. For example:
SET CHA X YYY N MMM<enter>
X = Channel 1 within the repeater
YYY = CDMA channel number for the repeater’s channel 1
(can be set to only channels within your system’s band.)
N = Channel 2 within the repeater
MMM = CDMA channel number for the repeater’s channel 2.
SET CHA 1 175 2 225<enter>