User's Manual

CI Wireless Inc. 1211 Ira E Woods Ave 18
Tel: [phone] Grapevine, TX 76051
6.6 Hub Interconnect Module
700-1005 Board Located on the Base Plate (Hub Interconnect Module)
Input Connectors
J1 - Ribbon Cable Connecting to the Controller Top Board Ass’y, (nearest LCD display &
Power Lead)
J2 - Ribbon Cable Connecting to the Controller Bottom Board Assembly (nearest keypad)
J3 - Fiber Optical Transceiver 1, RF OUT
J4 - Fiber Optical Transceiver 2, RF OUT
J5 - Fiber Optical Transceiver 3, RF OUT
J6 - Fiber Optical Transceiver 4, RF OUT
J7 - 1.9 GHz TX Power In Detector
J8 - 800 MHz TX Power In Detector
J9 - Power Input 12 VDC from AC Power Supply *Jumper Pin 1 to 3 for 24 VDC Operation
J10 - RF Modem
J11 - RS 485
Controls
VR 1 - Calibration 1.9 Detect TX Power In
VR 2 - Calibration 800 MHz TX Power In
VR 3 - Calibration RF Up Link Gain