Users Manual Part 3
Table Of Contents
- 3. System Fails Post-Installation Checks
- 4. Incorrect Navigation Data
- 5. System Will Not Connect to the Network
- 6. Connectivity of Each Ethernet Port
- SECTION 7 – MAINTENANCE AND REPAIR
- 1. Maintenance Requirements
- 2. Continued Airworthiness, FAR 25.1529
- 3. Airworthiness Limitations
- 4. General Instructions for Inspection
- 5. Electrical and Mechanical Inspection and Check
- 6. Instructions for Continued Airworthiness
- 7. Visual Inspection and Check
- 8. Scheduled Maintenance and Inspections
- 9. Unscheduled Maintenance
- 10. Repair Requirements
- APPENDIX A – ENVIRONMENTAL CHARACTERISTICS
- APPENDIX B – INFORMATION SHEETS
- 1. Aircraft Information Sheet
- 2. JetWave™ MCS-8562 Terminal AES Subsystem Components
- A. JetWave™ MCS-8562 Terminal AES OAE - FMA Installation Information Sheet
- B. JetWave™ MCS-8562 Terminal AES KANDU Installation Information Sheet
- C. JetWave™ MCS-8562 Terminal AES BUC-HPA Installation Information Sheet
- D. JetWave™ MCS-8562 Terminal AES Modman Installation Information Sheet
- E. JetWave™ MCS-8562 Terminal AES APM Installation Information Sheet
- APPENDIX C – CHECKLISTS
- APPENDIX D – CUSTOMER PORTAL
- 1. Customer Portal
- 2. APM Request Form
- A. Requester Name
- B. Requester Email
- C. Honeywell Representative Name
- D. Hon Representative Email
- E. PO Number
- F. DP/VAR/Customer Name
- G. DP/VAR/Customer Name Contact Name
- H. DP/VAR/Customer Name Contact Email
- I. Channel Partner/Integrator/STC
- J. Estimated APM Due Date
- K. Aircraft Make / Aircraft Model
- L. Aircraft Model Variant
- M. Additional Notes/Comments
- 3. APM Parameter File
- 4. Request Assistance
Table 7-1. Scheduled Maintenance
Inspection
Potential Damage
InspectionIntervalItemSI No.
External visualPaint damage, structural
damage, de-lamination
In accordance with the
aircraft inspection schedule
and after flying in known
conditions of lightning
Lightning diverters
External visualPaint damage, structural
damage, de-lamination,
puncture, dark marks/
streaking
In accordance with the
aircraft inspection schedule
and after flying in known
conditions of lightning/hail.
Fuselage mount
radome exterior,
radome skirt
exterior
External visualCorrosion, loose, or
missing fasteners
In accordance with the
aircraft inspection schedule
Antenna interface
mount
External visualCorrosion, loose, or
missing connectors
In accordance with the
aircraft inspection schedule
OAE – FMA
connectors
External visual and 5 mΩ
test
Non conform electrical
bonding
In accordance with the
aircraft inspection schedule
OAE-FMA
grounding and
bonding
External visualChafing, cracks in
insulation, breaks
In accordance with the
aircraft inspection schedule
OAE-FMA wiring
External visualCorrosion, loose, or
missing connectors
In accordance with the
aircraft inspection schedule
KANDU
connectors
External visual and 5 mΩ
test
Non conform electrical
bonding
In accordance with the
aircraft inspection schedule
KANDU grounding
and bonding
External visualCorrosion, loose, or
missing connectors
In accordance with the
aircraft inspection schedule
Modman and APM
connectors
External visual and 5 mΩ
test
Non conform electrical
bonding
In accordance with the
aircraft inspection schedule
Modman and APM
grounding and
bonding
9. Unscheduled Maintenance
A. Follow the Standard Practices Chapter of the Aircraft Maintenance Manual and do all the required
inspections and repairs, as shown in Table 7-2.
Table 7-2. Unscheduled Maintenance
InspectionPotential DamageItem
External visualPaint erosionHeavy rain/hailJetWave™ MCS-8562
Terminal AES FMA OAE
OAE
External visualPaint damage/radome
puncture
bird strike
RemovalNANAJetWave™ MCS-8562
Terminal AES system
Failure
Page 7-4
23-15-84
EFFECTIVITY
ALL
11 Nov 2020
© Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
JetWave™ MCS-8562 Terminal