Users Manual Part 2

Figure 5-2. AES Home and Status Info Page
This section describes the AES System configuration setting to be carried out on completion
of LRU installation activities for updating the aircraft tail number.
To update the aircraft tail number in AES system, maintenance level access is required
through the web based GUI. Refer to Accessing the Maintenance Interface.
The GUI AES status summary screen lets the maintainer navigate to all applicable options.
At the maintenance level, the Other Information and Control has an option to display/update
the current Aircraft ID stored in the AES Configuration data. Refer to Figure 5-3 to change
the AES aircraft ID information.
NOTE: The maximum allowed length for Aircraft ID is 16 characters. The allowed
characters are: upper-case alpha, lower case alpha, numerals, and '-' (dash)
Spaces or other characters are allowed.
The GUI AES status summary screen lets the user navigate to all applicable options. At
the User level, the Other Information & Control has an option to display the current Aircraft
ID stored in AES Configuration data. Refer to Figure 5-3 for the AES aircraft ID information
page.
Page 5-5
23-15-84
EFFECTIVITY
ALL
11 Nov 2020
© Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
JetWave™ MCS-8562 Terminal