Users Manual Part 2

The JetWave™ MCS-8562 Terminal is manufactured by Honeywell. Honeywell
manufactures and sells this hardware to end customers, as well as service providers.
(2) Customer Support Contacts:
If you purchased your JetWave™ MCS-8562 Terminal hardware from any of the service
providers, please contact their customer support phone number for all JetWave™
MCS-8562 Terminal installation, integration, configuration, service activation, and
troubleshooting issues.
If, however, you purchased your JetWave™ hardware directly from Honeywell, please
contact Honeywell Customer Support according to the information provided at the time of
your JetWave™ MCS-8562 Terminal MCS-8562 Terminal activation.
B. Terminal Activation
(1) To activate the terminal with your service provider you need to provide the ACM TPK.
(2) The TPK is written on the test report document delivered with the MODMAN.
(3) The TPK may be viewed using the MODMAN GUI.
2. Certification and Approvals
All antenna installations must obtain the approval of the appropriate government air/radio authority, such
as the FAA, EASA, CAAC, or Transport Canada. Contact the authorities when you begin planning your
communication system in order to minimize approval and certification issues.
New configurations (If switches, control relay, changes to inter-LRU wiring losses, radome and/or IRS data
sources) are subject to re-evaluation and must be coordinated through Honeywell.
3. Post Installation System Checkout Procedures
A. General Overview
This section supplies the information required to determine the operational readiness of the
JetWave™ MCS-8562 Terminal, made up of the Modman, APM, BUC-HPA, KANDU, and FMA.
The installed LRUs require operational and diagnostic testing for one of the reasons listed below:
Operational verification tests that verify the operational readiness of the unit after installation
on an aircraft.
-
- Fault verification and diagnostics to verify that a fault exists and produce system reports for
trouble shooting purposes
- Operational verification of repairs that verify the operational readiness of units that have been
repaired before re-installation on an aircraft.
Page 5-2
23-15-84
EFFECTIVITY
ALL
11 Nov 2020
© Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
JetWave™ MCS-8562 Terminal