Users Manual Part 2

Figure 4-10. APM Load List Select
f The Load Progress window will open.
(1) The progress bar will stay at 0 percent during file transfer.
The progress bar will jump to 10 percent when the files
are fully transferred and are being unzipped.
(2) Expect a total load time of up to 5 minutes for the APM.
(3) If the load ends with a failed message, then carry out the
following procedure:
• Wait 10 minutes if another LRU also dataloaded
• Reboot the system by de-asserting the data load
discrete.
• Wait 12 minutes
• Re-assert the dataload discrete
• Restart the data load.
g When the data loader reports a successful load as shown in Figure
4-11, select “OK” and proceed with the next step.
Page 4-16
23-15-84
EFFECTIVITY
ALL
11 Nov 2020
© Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
JetWave™ MCS-8562 Terminal