Users Manual Part 2

Table 4-1. Data Sets
Transfer ProcessData SetLRU
Upload onlyJetWave™ MCS-8562 Terminal Modman
LRU Operational file
Modman
Upload only through the ModmanJetWave™ MCS-8562 Terminal APM LRU
Operational file
APM
Upload only through the ModmanJetWave™ MCS-8562 Terminal KANDU
LRU operational file
KANDU
Upload only through the ModmanJetWave™ MCS-8562 Terminal BUC-HPA
LRU operational file
BUC-HPA
Upload only through the ModmanJetWave™ MCS-8562 Terminal OAE LRU
operational file
FMA
In the above listing, upload is defined as the transfer of a data set from the ARINC 615A
data loader and a download is defined as the transfer of a data set from Modman to the
ARINC 615A data loader.
The ARINC 665 data load set for the JetWave™ MCS-8562 Terminal comprises of:
*.LUH is the load part index file-
- *.LUP is the data file which contains compressed software image/images and manifest
files.
During the data loading process, the respective LRU unzips the file and extracts the
manifest file and the images. Each LRU identifies the part for itself from the manifest file.
The .LUP files that follow are included as part of ARINC665 data load file for different AES
LRUs.
Modman operational data-
- AES configuration data
- BUC-HPA operational image
- KANDU operational image
- FMA operational image.
NOTE: More than one CONFIG sub parts may be present in a configuration load, one
per AES configuration file type.
For the ARINC 615A data load operations, an A615A target connection must be defined.
Target connection defines a TFTP client on the Modman and TFTP server on the data
loader that will be used for file transfer.
Page 4-6
23-15-84
EFFECTIVITY
ALL
11 Nov 2020
© Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
JetWave™ MCS-8562 Terminal