SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 3-11. (Sheet 5 of 14) FMA Outline and Installation Drawing (90002609-001) EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 3-11. (Sheet 6 of 14) FMA Outline and Installation Drawing (90002609-001) EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 3-11. (Sheet 7 of 14) FMA Outline and Installation Drawing (90002609-001) EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 3-11. (Sheet 8 of 14) FMA Outline and Installation Drawing (90002609-001) EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 3-11. (Sheet 9 of 14) FMA Outline and Installation Drawing (90002609-001) EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 3-11. (Sheet 10 of 14) FMA Outline and Installation Drawing (90002609-001) EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 3-11. (Sheet 11 of 14) FMA Outline and Installation Drawing (90002609-001) EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 3-11. (Sheet 12 of 14) FMA Outline and Installation Drawing (90002609-001) EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 3-11. (Sheet 13 of 14) FMA Outline and Installation Drawing (90002609-001) EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 3-11. (Sheet 14 of 14) FMA Outline and Installation Drawing (90002609-001) EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 3-12. (Sheet 1 of 9) JetWave™ MCS-8562 Terminal Interconnect Diagram - (90410870) EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 3-12. (Sheet 2 of 9) JetWave™ MCS-8562 Terminal Interconnect Diagram - (90410870) EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 3-12. (Sheet 3 of 9) JetWave™ MCS-8562 Terminal Interconnect Diagram - (90410870) EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 3-12. (Sheet 4 of 9) JetWave™ MCS-8562 Terminal Interconnect Diagram - (90410870) EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 3-12. (Sheet 5 of 9) JetWave™ MCS-8562 Terminal Interconnect Diagram - (90410870) EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 3-12. (Sheet 6 of 9) JetWave™ MCS-8562 Terminal Interconnect Diagram - (90410870) EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 3-12. (Sheet 7 of 9) JetWave™ MCS-8562 Terminal Interconnect Diagram - (90410870) EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 3-12. (Sheet 8 of 9) JetWave™ MCS-8562 Terminal Interconnect Diagram - (90410870) EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 3-12. (Sheet 9 of 9) JetWave™ MCS-8562 Terminal Interconnect Diagram - (90410870) EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal SECTION 4 – SOFTWARE CONFIGURATION 1. ARINC 615A Software Data Load Process A. Introduction As a minimum, APM system configuration files need to be loaded onto the JetWave™ MCS-8562 Terminal. The JetWave™ MCS-8562 Terminal LRUs are preloaded with a full software load and there may be a need to perform a field data load under normal conditions during installation.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal C. Windows PC IP Configuration for Data Load On the data loader PC NIC (network interface controller) card, assign this static IP address and subnet address to the Ethernet port that will be connected to the Modman: - IP address: 172.29.55.10 - Subnet address: 255.255.255.0. NOTE: The above IP and subnet addresses are based on what is set in the Aircraft Services Configuration File in the APM.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 4-2. Control (P4) Properties Set the static IP and subnet address as depicted in Figure 4-3. Press “OK” when done. EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 4-3. Internet Protocol Version 4 (TCP/IPv4) Properties Afterwards, open a Windows Command Prompt terminal and type “ipconfig”, which will print the list of network configurations on the PC. Find the name of the Ethernet adapter (ex. CONTROL (P4) ) in which the Modman Ethernet is connected to, and verify that the IPv4 address and Subnet Mask match what was configured in the steps above. D.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal - During system initialization - When in AES Critical Fault Mode. The maintenance operator is responsible for determining which loads are presented to the JetWave™ MCS-8562 Terminal AES system through the Modman for data load. JetWave™ MCS-8562 Terminal AES system in turn will determine the files required to meet the data load request.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Table 4-1.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal E. Load APM configuration files (1) The APM configuration files are install specific and should be loaded before the rest of the installation is performed. For instruction on obtaining the files, refer to Appendix D. NOTE: (a) The following procedure supports any ARINC 615A data loader that supports the ARINC 665-2 file format.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 4-4. AES GUI Login Screen EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal EFFECTIVITY ALL 4 At the GUI login, enter the username “User” and click “Log in”. The password field should be left blank. 5 In the GUI STATUS INFO block, wait until all the LRUs indicate a status of “OK” before continuing. Refer to Figure 4-5.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 4-5. Status Info Screen EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal 6 Assert the data load enable discrete noting that installations may connect this Modman input to a switch or to another aircraft subsystem. 7 Use the ARINC 615A data loader to discover the JETWAVE system data loadable LRUs including Modman, KANDU, BUC-HPA, APM, and FMA. a APM Data Load (1) Choose the desired APM file for the install. Refer to Appendix D for obtaining the file. (2) Load the desired .
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 4-6. JetWave APM Discover b EFFECTIVITY ALL Under the “Utilities” tab, select “Create Load List”, which will open a new window as seen in Figure 4-7. In the “Select Load Components” box, locate the .luh dataload file for the APM on the data load PC. Select the file and click the top arrow to transfer the file to the “Selected Components” box as shown in Figure 4-7. 23-15-84 © Honeywell International Inc.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 4-7. Create Load List c EFFECTIVITY ALL Select “OK” when the .luh dataload file has been selected. A window will open confirming that a load list has been created, as shown in Figure 4-8. Acknowledge the window pop-up by clicking OK. 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 4-8. Load List Created d EFFECTIVITY ALL Select the “Upload” tab, as shown in Figure 4-9. 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 4-9. Upload Load List e EFFECTIVITY ALL A new window will open where the load list (.LUR) can be selected, as seen in Figure 4-10. The load list (.LUR) can be found in the same directory and with the same file name beginning as the .luh dataload file. Press “OK” to immediately begin the data load. 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 4-10. APM Load List Select f g EFFECTIVITY ALL The Load Progress window will open. (1) The progress bar will stay at 0 percent during file transfer. The progress bar will jump to 10 percent when the files are fully transferred and are being unzipped. (2) Expect a total load time of up to 5 minutes for the APM.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 4-11. Load Operation Completed WARNING: WAIT 12 MINUTES OF UNINTERRUPTED POWER-ON-TIME AFTER RELEASING THE DATA LOAD DISCRETE. THE SYSTEM FUNCTIONS AND GRAPHICAL USER INTERFACE MAY BE USED DURING THIS TIME. h F.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 4-12. AES GUI Login Screen EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal (e) EFFECTIVITY ALL In the GUI STATUS INFO block, wait until all the LRUs indicate a status of “OK” before continuing. Refer to Figure 4-13. If the JETWAVE system mute reasons indicate “Initialization” or “Critical Fault” and all LRUs are at the same software version, the fault should be investigated before the data load process is started. 23-15-84 © Honeywell International Inc.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 4-13. Status Info Screen EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal EFFECTIVITY ALL (f) Assert the data load enable discrete noting that installations may connect this Modman input to a switch or to another aircraft subsystem. (g) Use the ARINC 615A data loader to discover the JETWAVE system data loadable LRUs including Modman, KANDU, and FMA.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Blank Page EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal SECTION 5 – SYSTEM COMMISSIONING 1. Provisioning of User Services Within the JetWave™ MCS-8562 Terminal, the Modman LRU is responsible for bringing satellite network IP access to onboard users through In-flight Entertainment Systems or through Onboard Network Systems.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal The JetWave™ MCS-8562 Terminal is manufactured by Honeywell. Honeywell manufactures and sells this hardware to end customers, as well as service providers.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal B. System Health and Configuration The JetWave™ MCS-8562 Terminal LRUs are shipped with the operational software preloaded. Refer to SECTION 4 SOFTWARE CONFIGURATION to verify that all of the LRUs are at the same software level, or if a software upgrade is required for any of the LRUs.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal - An available 10/100/1000 Ethernet interface - Windows 7 operating system. On any of the Internet browser (Internet Explorer 8 compatible), enter 172.29.55.1 in the address bar. Login page will be presented as the root page, allowing entry of the user name and password. Figure 5-1 shows the login page. Figure 5-1.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 5-2. AES Home and Status Info Page This section describes the AES System configuration setting to be carried out on completion of LRU installation activities for updating the aircraft tail number. To update the aircraft tail number in AES system, maintenance level access is required through the web based GUI. Refer to Accessing the Maintenance Interface.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 5-3. Aircraft ID Display/Update Information Page EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal View and verify the AES configuration data, navigate to the "Configuration Files" information pages under the other information and control menu by referring to the APM Version and Manufacturing Info page to check against the recommended APM file for the particular STC. The typical configuration file information page is shown in Figure 5-4. Check the part number of the configuration files under the APM tab against the STC.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 5-4. (Sheet 1 of 6) View Configuration Files Page EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 5-4. (Sheet 2 of 6) View Configuration Files Page EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 5-4. (Sheet 3 of 6) View Configuration Files Page EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 5-4. (Sheet 4 of 6) View Configuration Files Page EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 5-4. (Sheet 5 of 6) View Configuration Files Page EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 5-4. (Sheet 6 of 6) View Configuration Files Page EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal To view the health status of the JetWave™ MCS-8562 Terminal, navigate to the “AES Summary” under the Health Statuses menu on the left. This will allow you to view and make sure of the health status of the JetWave™ MCS-8562 Terminal. The AES summary and interlink status are shown in Figure 5-5. EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 5-5. (Sheet 1 of 2) Health Statuses (excerpt), AES Summary and Link Statuses EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 5-5. (Sheet 2 of 2) Health Statuses (excerpt), AES Summary and Link Statuses EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal To see the AES LRUs hardware and software version and part number, navigate to the Version and Manufacturing Information menu. Figure 5-6 shows the typical Modman Version and Manufacturing Information page. Make sure the version and manufacturing information are current for all the LRUs. NOTE: EFFECTIVITY ALL Follow appropriate Jetwave Service Bulletin reference to validate the SW currently installed on the Jetwave system.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 5-6. AES Modman and Manufacturing Information Page EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal C. EFFECTIVITY ALL Discrete Input Testing (1) If wired, activate the Modman Reset by toggling Modman reset switch on the JetWave™ MCS-8562 Terminal AES control panel. (2) If the Modman Reset is not wired, then reset the system from the GUI. (3) Monitor the “status” LED on the front of the Modman, progresses from red color to steady state green as seen during initial power-on.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 5-7. Discrete I/O State EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal D. ARINC 429 Input Interface Testing For the operation of the JetWave™ MCS-8562 Terminal, the aircraft must have a functional IRS providing ARINC 429 labels to the KANDU. Functional IRS is interfaced with the KANDU through Receive only ARINC 429 interface through which the required ARINC 429 labels as defined in the APM configuration file are made available.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 5-8. (Sheet 1 of 2) Aircraft and Satellite Status EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 5-8. (Sheet 2 of 2) Aircraft and Satellite Status EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal E. Manual Steering of the Antenna To do a commanded test to manually steer the antenna, navigate to "Manual Antenna Steering" under the commanded test menu. Monitor the antenna movement in accordance with the commanded test fed through the GUI tool. Refer to Figure 5-9. NOTE: EFFECTIVITY ALL New Radomes should be checked for any possible interference with normal Antenna movement prior to activation.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 5-9. Manual Antenna Steering EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal F. System Available (Cockpit Control Panel) Output Once the JetWave™ MCS-8562 Terminal is powered up, if wired, monitor the “System Available” status discrete. Make sure that the discrete state agrees with the discrete output in the GUI. Refer to Figure 5-7. 4. Cable Calibration The Modman will not transmit until it has been calibrated, with the transmit cable calibration.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 5-10. (Sheet 1 of 2) Calibrate Transmit Cable Status Page EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 5-10. (Sheet 2 of 2) Calibrate Transmit Cable Status Page EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal 5. FMA Antenna Alignment Procedure A. Antenna Assembly Orientation For the JetWave™ MCS-8562 Terminal to point to the servicing satellite correctly, it is important to align the antenna assembly after installation or replacement. The FMA assembly has a built in IMU and its orientation must be aligned with respect to the principal axes of the aircraft which is determined through aircraft IRS.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 5-12. GUI Calibrate Antenna Alignment Page (2) EFFECTIVITY ALL The location of aircraft in terms of latitude and longitude is indicated along with the selection of the servicing Geo stationary satellite used for the antenna alignment. 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal (3) EFFECTIVITY ALL For the automatic antenna alignment calibration, it is recommended to tow and put the aircraft in an open area away from aircraft hangars such that there is a clear view towards the satellite being used for the connection with the true heading (not magnetic heading) of the aircraft pointed in one of four recommended aircraft true heading values displayed on the GUI antenna calibration page.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 5-13. Antenna Alignment EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal (4) The automatic antenna alignment calibration can be carried out at up to four different aircraft headings. Out of the available headings, it is required to do only one automatic alignment calibration while the aircraft true heading is toward one of the preferred directions. NOTE: (5) The values displayed in Figure 5-13 will change depending on the location and attitude of the aircraft.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal 6. On-ground Testing and Commissioning NOTE: There are restrictions to testing the JetWave™ MCS-8562 Terminal for the commissioning process. Each country has its own restrictions to on-ground testing and transmission. Verify regulations before testing the system. Particular attention must be observed the first time the system is turned on and able to transmit.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Make sure the “Datalink Available” status is indicated in the control panel. C. Mission Configuration Data (1) General Overview: (a) The Mission configuration data define the parameters required for operation with the External Modem. The Mission configuration data is stored in the Modman and the APM as an ASCII text file containing comma separated list of parameters.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Table 5-3. RX Frequency Band Options (GHz) RF Band Start (MHz) RF Band Stop (MHz) IF Band Start (MHz) IF Band Stop (MHz) LO (MHz) 19.2-19.725 19200 19725 950 1475 18250 19.7-20.225 19700 20225 950 1475 18750 20.2-20.725 20200 20725 950 1475 19250 20.7-21.225 20700 21225 950 1475 19750 EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 5-14. JetWave™ MCS-8562 EIRP SD Vs Skew Angle (30 ~ 31 GHz) EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Table 5-4. JetWave™ MCS-8562 EIRP SD vs Skew Angle (30 ~ 31 GHz) EFFECTIVITY ALL Skew angle (degrees) EIRP SD (dBW/40KHz) 0 43.5 5 51.3 10 50.4 15 51.7 20 52.7 25 54.4 30 52.4 35 53.7 40 55.0 45 54.7 50 53.6 55 51.5 60 51.4 65 46.7 70 43.5 75 41.2 80 39.6 85 38.7 90 28.3 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 5-15. JetWave™ MCS-8562 EIRP SD Vs Skew Angle (29 ~ 30 GHz) EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Table 5-5. JetWave™ MCS-8562 EIRP SD Vs Skew Angle (29 ~ 30 GHz) Skew angle (degrees) EIRP SD (dBW/40KHz) EIRP SD (dBW/40KHz) For GSO only 0 19.8 29.7 5 21.2 32.0 10 25.7 32.3 15 33.4 33.7 20 34.6 34.6 25 35.0 35.0 30 34.3 34.3 35 34.3 34.3 40 34.5 34.5 45 35.1 35.1 50 36.0 36.0 55 33.4 33.4 60 30.1 30.1 65 25.2 25.2 70 21.9 21.9 75 19.6 19.6 80 18.0 18.0 85 17.1 17.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal EFFECTIVITY ALL - Purge existing Mission Configuration file using the PURGE button. - Download existing Mission Configuration file to external PC, using the DOWNLOAD button. 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 5-16. AES GUI Mission Configuration page: EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 5-17. AES GUI Mission Configuration CREATE page: EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal (3) Mission Configuration file Activation: (a) (4) Switching of Modem Mode: (a) (b) EFFECTIVITY ALL Once the Mission Configuration files are loaded, they are displayed on the Mission Configuration page. Select the ACTIVATE button against the file to activate that file. Once active, the ACTIVATE button legend changes to Active. Only one file can be set as active at any given time.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 5-18. AES GUI Switch Modem Mode page EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal (5) BUC-HPA IF input level to produce Maximum Operational Power (MOP): The following MOP output levels can be achieved depending on the modem power output, IF switch loss and the IF cable loss between the modem and BUC-HPA: (6) - BUC-HPA nominal input power of -22dBm for an EIRP of 46dBW for -20dBc Adjacent Channel Power Ratio (ACPR) in the frequency range of 29 -30 GHz - BUC-HPA nominal input power of -24dBm for an EI
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 5-19. Network Status B. EMC Interference to Other Systems (1) EFFECTIVITY ALL Power up the system and let it acquire to the network. 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal EFFECTIVITY ALL (2) Begin a two way (Rx and Tx) video conference call with a tool such as Microsoft Lync or Skype. (3) Test the functioning of other systems with antennas installed adjacent to the FMA and observe for any mutual interference. (4) Monitor the link signal quality C/N and Eb /No parameters. These parameters are found under the Satellite Link Status page. Refer to Figure 5-8.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal SECTION 6 – TROUBLESHOOTING 1. Post-installation Troubleshooting This section supplies troubleshooting procedures for the JetWave™ MCS-8562 Terminal. Airline maintenance engineers can troubleshoot the JetWave™ MCS-8562 Terminal on the ground, with the health status information and Fault Details and Isolation assistance displayed on the AES GUI.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal (2) Locate Data Load Enable switch. Make sure that the Data Load Mode Enable switch is in DISABLED position. (3) Locate the SATCOM power switch. Turn the SATCOM system on. (4) Wait for 2 minutes for the JetWave™ MCS-8562 Terminal to boot. (5) Open an Internet browser using Monitoring laptop. Type URL “172.29.55.1” or “http://172.29.55.1”.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal (6) Login page will be presented. Login at the maintenance operation level with Username: “Maintenance” and Password: “Earthbound”. (7) Access the user interface with Username: “User” and no password. G. User may press Log out button to log out. Upon logging off, log in page will be presented by default. H.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 6-2. JetWave™ MCS-8562 Terminal Summary Page EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal I. Downloading AES Historical Logs (1) To view the historical fault logs, under the AES historical logs pane, select the "Fault Log". A screenshot of fault log page is shown in Figure 6-3. NOTE: (2) (3) The log files can be viewed a number of ways.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal Figure 6-3. JetWave™ MCS-8562 Terminal Fault Log Download Page EFFECTIVITY ALL 23-15-84 © Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal (5) The fault log contains the details that follow: (6) J. - LRU POST and BITE fault codes and texts - Location information, if available - LRU Recorded Temperature, if available - LRU Recorded Time, if available, if unavailable default time will be displayed - LRU Antenna pointing information, if applicable - Occurrence count.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal M. Visual Inspection and Check Do the procedures that follow to examine the JetWave™ MCS-8562 Terminal AES OAE assembly and inter-connecting wiring and LRUs after installation of the unit onto the aircraft. Follow all approved safety standards and practices during the inspection. FAILURE TO DISCONNECT CIRCUIT BREAKERS CAN LEAD TO INJURY TO THE OPERATOR AND DAMAGE TO THE EQUIPMENT. WARNING: N.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal 5 6 Each LRU has a LRU controller that: - Maintains the state of the LRU - Generates BITE events applicable to the LRU - Sends relevant BITE events to the AES controller (for the AES controller to make a decision on overall AES state, and for it to record in its AES historical log). - Record BITE event generated from the LRU.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal 9 The LRU records the BITE event into a specific LRU log, dependent on the type of fault or event. NOTE: EFFECTIVITY ALL Not all BITE events indicate an error situation. BITE events are also used for storing significant events in the historical logs, either on the LRU or in the AES controller, or for informing the AES controller of important system wide information. 10 BITE events are sent to the AES controller.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL JetWave™ MCS-8562 Terminal (b) 19 Each BITE event is also associated with a reaction table which describes the confirmation actions, and event actions, the LRU should take when this BITE event occurs. For events that are reported to the AES controller, there is a reaction table describing what the AES controller should do when the event is reported to it.
