Users Manual Part 1

Table Of Contents

Figure 3-5. LAIM Assembly with FMA and BUC-HPA Placement on Aircraft (Typical Installation)

(e) On completion of the LRU interconnection and applying power to the FMA, the

FMA will stay in its current position until it is told to move by the KANDU.

6. Inspection of Waveguide

A. FMA Human Exposure to RF EM Fields

ARNING: THE JetWave™ MCS-8562 Terminal IS A SOURCE OF NON-IONIZING

RADIATION.

(1) The Minimum Safe Distance:

FMA = 66.6 feet (20.3 m).-

NOTE: The minimum safe distance for occupational/controlled exposure is determined

based on the computational method specified in FCC Office of Engineering

and Technology; Bulletin Number 65, Edition 97-01: Evaluating compliance

with FCC Guidelines for human exposure to Radio Frequency Electromagnetic

fields.

(2) The areas which the risk exists are based upon the location of the antenna. This means

personnel operating on the apron, transient personnel, and the general population in the

controlled exposure category will not be exposed to levels in excess of the limits.

Maintenance personnel working close to the tail must be protected by disabling the

transmitter before they approach that area of the aircraft.

Page 3-23

23-15-84

EFFECTIVITY

ALL

11 Nov 2020

SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL

JetWave™ MCS-8562 Terminal