Users Manual Part 1

SECTION 2 – SYSTEM PRE-CONFIGURATION
1. AES Configuration Data
NOTE: Any tools for preparing the config files for the terminal must be licensed from Honeywell.
The AES configuration data is a set of configuration files, stored on the APM. Each configuration file contains
a set of airplane-unique parameters. The parameters define the configuration of the AES necessary for
the initialization and operation of the Honeywell JetWave™ MCS-8562 Terminal AES system. The AES
configuration data holds information such as:
- Aircraft tail registration number
- Aircraft structural blockage information
- ARINC 429 label definition set for positioning and steering used by the KANDU
- WOW input and polarity, etc
- USER operational preferences
- LAN network configuration data
- Ability to download software and offload log over the air.
A. AES System Configurations
The details of the ARINC 429 labels required for the JetWave™ MCS-8562 Terminal are mentioned
in the table below:
Table 2-1. ARINC 429 Label List
Approximate
Resolution
Maximum
Transmit
Interval
(msec)
Maximum
Transmit
Delay
(msec)SourceDescription
Required
ARINC 429
LabelsLabel Set
Preferred Label Set
For best
accuracyLabel
1s1000NilUTC TimeYes150
1 day1000DateYes260
0.000172°100
/20
160
/1000
Hybrid
/GNSS
Present Position – Latitude /
GNSS Latitude
Yes254
/110
0.000172°100
/20
160
/1000
Hybrid
/GNSS
Present Position – Longitude
/GNSS Longitude
Yes255
/111
0.125 ft40
/20
65
/1000
Hybrid
/GNSS
Altitude
/GNSS Altitude (MSL)
Yes261
/76
0.0055°
/0.4°
50110Hybrid
/INS
True HeadingYes
/No
132
/314
0.011°2050INSPitch AngleYes324
0.01°2050INSRoll AngleYes325
Page 2-1
23-15-84
EFFECTIVITY
ALL
11 Nov 2020
© Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
JetWave™ MCS-8562 Terminal