Users Manual Part 1

Table Of Contents

D. Units of Measure

(1) Measurements, weights, temperatures, dimensions, and other values are expressed in

the USMS followed by the appropriate SI metric units in parentheses. Some standard tools

or parts such as drills, taps, bolts, nuts, etc. do not have an equivalent.

E. Illustration

(1) Supplemental illustrations use a suffix number to the basic figure number. For example,

if Figure 501-5 is used, it signifies that it is an illustration of the item identified by index

number 5 in Figure 501.

(2) Illustrations with no specific designation are applicable to all units.

2. Scope

This manual provides detailed information for avionics technicians about the wiring and installation of

every component of the JetWave™ MCS-8562 Terminal. The radome selected must be approved by

Honeywell in order to meet the performance standards. The radome installation will depend on the

radome selected by the installer for each aircraft type. The installer is responsible for the approval and

certification of system components on the aircraft, and for the installation of wiring in the aircraft.

3. Part Numbers

The following Part Numbers and variants cover the various JetWave™ MCS-8562 Terminal hardware

configurations:

- 90400012-0001 or 90400012-0002 - Modman

- 90401121 - APM

- 90002609-001 - FMA

- 90404518 - KANDU

- 90003227-003 BUC-HPA

Page INTRO-2

23-15-84

EFFECTIVITY

ALL

11 Nov 2020

SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL

JetWave™ MCS-8562 Terminal