User's Manual Part 6

Page 5-4
3 Mar 2017
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
For the ARINC 615A data load operations, an A615A target connection must be defined.
Target connection defines a TFTP client on the Modman and TFTP server on the data loader
that will be used for file transfer.
D. Procedure (AIT Flight Simulyzer v3.0.0)
(1) Refer to the latest revision of SBs JETWAVE-23-0001, JETWAVE-23-0002, and
JETWAVE-2
3-0003 or later SB for the software upload procedures.
(2) Setup
NOTE: These setup steps must be run each time the Data Loader application is closed and
opened again.
(a) Open the AIT ‘Flight Simulyzer
’ application.
(b) Select the “Settings” button on the left side of the screen.
Draft as of 31 May 2017