User's Manual Part 6

Page A-1
3 Mar 2017
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
APPENDIX A
1. RTCA/DO-160G Environmental Characteristics
A. Modman
The following characteristics are taken from the core e
quipment qualification program and do not
reflect any additional qualification conducted on a per installation basis.
Section Condition Category
4 Temperature and altitude A1(V)
NOTE: Below 5˚F (-15˚C), user services are not offered. Altitude for all units extended to 55,000
feet (16,764 m) during the qualification test. Overpressure 28.9 PSI (199 kPa), Decompression
6,000 to 55,000 (1828.8 to 16,764 m) in 2 seconds.
5 Temperature variation B
6 Humidity B
7 Operational shocks and crash safety B
8 Vibration CAT S, CURVE B2
9 Explosive atmosphere X - not required
10 Waterproofness Y
11 Fluids specification X - not required
12 Sand and dust X - not required
13 Fungus resistance F
14 Salt fog X - not required
15 Magnetic effect A
16 Power input A (WF) HLPI
NOTE: Extended low frequency operation to 320 Hz.
17 Voltage spike A
NOTE: Extended to 1,000 volts.
18 Audio frequency conducted susceptibility K
NOTE: Amplitude of applied signal to be 10% of nominal AC voltage.
19 Induced signal susceptibility ZW
NOTE: Extended low frequency operations to 320 Hz.
Draft as of 31 May 2017