User's Manual Part 6

Page 7-46
3 Mar 2017
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
KANDU
(06)
0x 0089 Auto Alignment CCW Check Info events - Recording what
happened in the LRU
0x 008A Auto Alignment CW Check
0x 008B Auto Alignment Check Fail
0x 008C Auto Alignment Fail - Sensor Fail
0x 008D Auto Alignment Fail - OAE Comms Fail
0x 008E Auto Alignment Fail - Init Physical Lock
Fail
0x 008F Auto Alignment Fail - Init RF Lock Fail
0x 0090 Auto Alignment Fail - In Progress
Physical Lock Fail
0x 0091 Auto Alignment Fail - In Progress RF
Lock Fail
IP security (FB) 0x 0000 IP security event Use well defined port and IP
Address
Reset (FC) 0x 0001 Watchdog Info events - Recording what
happened in the LRU.
0x 0002 Software command
0x 0004 SW exception
0x 0005 Power cycle or reset pin
Software
configuration
(FD)
0x 0001 HW SW Compatibility Reload compatible software with
the A615A data loading process.
0x 0002 LRU SW Compatibility
0x 0003 Configuration parameter missing Reload the configuration data with
the A615A data loading process.
0x 0004 Primary image corruption warning - Reboot the LRU to load valid
primary image and check if fault
goes away.
- If not, reloading of software is
required to load a fresh image.
Table 7-6. L3 Codes (Continued)
L1 L2 L3 Code L3 Description Repair Action
Draft as of 31 May 2017