User's Manual Part 2

Page 4-41

3 Mar 2017

23-15-29

SYSTEM DESCRIPTION AND INSTALLATION MANUAL

JetWave™ System

When installing the JetWave™ system, follow the cabling requirements listed below:

• Ethernet LAN/WAN cables must meet flammability and TIA/EIA568-A CAT 5E requirements.

• Carlisle IT (ECS) 422404 or NF24Q100-01 is recommended for Quadrax connections.

• Twisted shielded pairs must meet ARINC 791 wiring requirements or equivalent.

Refer to Figure 4-34, thru Figure 4-37 for wire size recommendations.

Refer to Figure 4-21 for the Modman (PN 90400059-0001) outline and installation drawing.

Refer to Figure 4-22 for the Modman Variant 2 (PN 90400059-0002) outline and installation drawing.

Refer to Figure 4-23 for the APM (PN 90401592) outline and installation drawing.

Refer to Figure 4-24 for the APM (PN 90405762) outline and installation drawing.

Refer to Figure 4-25 for the KANDU (PN 90401657) outline and installation drawing.

Refer to Figure 4-26 for the KANDU Variant 2 (PN 90405004) outline and installation drawing.

Refer to Figure 4-27 for the KRFU (PN 90401573), conduction-cooled 1 (maximum operating temperature

of 185°F (85°C)), outline and installation drawing.

Refer to Figure 4-28 for the KRFU (PN 90402347), conduction-cooled 2 (maximum operating temperature

of 158°F (70°C)), outline and installation drawing.

Refer to Figure 4-29 for the KRFU (PN 90401571), forced air cooled, outline and installation drawing.

Refer to Figure 4-30 for the TMA (PN 90401428) outline and installation drawing.

Refer to Figure 4-31 for the FMA (PN 90000380ICD) outline and installation drawing.

Refer to Figure 4-32 for the Fuselage Mount Radome (PN 90401395) outline and installation drawing.

NOTE:

The Fuselage Mount Radome is offered as a standard part and varying skirts can be used to

adapt this to different airframe platforms. No Tail Mount Radome is depicted as this is airframe

platform specific.

Table 4-10. Cabling Requirements

Cable Conductor Type

Single

Point

Multiple

Point

Minimum Conductor

Coverage by Shield

Power Lines Twisted pair NA NA NA

Ethernet Data Quadrax, twisted pair - Yes 100%

RF Coaxial, waveguide - Yes 100%

A429 Twisted pair, stranded - Yes 95%

RS-422 Twisted pair, shielded - Yes 100%

Discrete Twisted pair, shielded, KANDU

Single conductor, shielded, grounds

- Yes 100%

Draft as of 31 May 2017