User's Manual Part 1

Page TI-3
3 Mar 2017
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
2-1 Paragraph 2.1, revised the title from “Overall Jetwave System
Architecture” to “Jetwave System Overview”.
All
2-2
Table 2-1, revised the PN for TMA from 904000013-0001 to
904000013-0001.
All
2-3
Table 2-4, revised the operating temperature range and
deleted APM in Interfaces.
All
2-5
Table 2-6, Added the KANDU variant 2 reference to Cooling.
All
2-5
Table 2-7, revised the specifications for weight, power
consumption, power dissipation and cooling for
conduction-cooled 1 configuration.
All
2-6
Table 2-7, revised the specifications for power consumption,
power dissipation and cooling for conduction-cooled 2
configuration and the specifications for power consumption for
Forced air configuration.
All
2-7
Table 2-7, revised the specifications for power dissipation and
operating temperature for forced air configuration.
All
2-12
Paragraph 2.3, Revised Step 3 to "ARINC 791 TX Mute
between the Modman and the KANDU is optional, the
Honeywell implementation uses RS422 signaling on
manufacturer-specific circuits 3 to 4 instead”.
2-13
Paragraph 2.4B, revised “the Modman starts continuous BITE”
with “the Modman starts additional POST and BITE”.
All
2-13
Paragraph 2.4C, revised “Access system” with “GUI”.
All
2-13
Paragraph 2.4D, revised “Access system” with “GUI”.
All
2-13
Paragraph 2.4E, revised “Access system” with “GUI”.
All
2-14
Paragraph 2.4F, revised “SNMP” to “GUI” and deleted “manual
antenna alignment”.
All
2-14
Paragraph 2.4F, added new step “The system will exit the
commanded mode by a System reset”.
All
3-1 Paragraph 3.1, revised to add additional configuration data
information.
All
Table of Highlights (Continued)
Page Description of Change Effectivity
Draft as of 31 May 2017