User's Manual Part 1

Page TI-2
3 Mar 2017
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
Remove and discard all pages of the manual and replace them with the attached pages. Write the revision
number, revision date, and replacement date on the Record of Revisions page.
Revision bars mark the technical data that changed in this revision; those changes are described in the Table
of Highlights. Editorial changes are not marked with a revision bar.
The table of highlights tells users what has changed as a result of the revision. The table consists of three
columns.
The Task/Page column identifies the blocks of changed information, such as a task, subtask, graphic, or parts
list, and the page on which that block starts. Revision marks, when provided, identify the location of the change
within the block.
The Description of Change column tells about the change or changes within each block. The description of
change is often preceded by a paragraph or figure reference that applies to the block of information.
The Effectivity column tells the user the part number(s) to which the block of information applies. The default
value for this column is “All.” “All” means that the block applies to all parts.
Table of Highlights
Page Description of Change Effectivity
Global Change: Changed the content and format to agree with
the Honeywell processes in effect at the time of the release of
this revision. These changes are not identified with revision
bars.
All
Global Change: The editorial changes and data that were
moved or reformatted are not identified with revision bars.
Global Change: All paragraphs, tables, and figures have been
renumbered and are not identified with revision bars.
T-1 Added MCS 8200 and MCS 8000 to all model.
Added MCS 8250 Class A Modman Version 2, KANDU Version
2 and Conduction Cooled Version 2.
All
TI-1 Revised nomenclature in Table TI-1 for all part numbers.
Added MCS 8250 Class A Modman Version 2, KANDU Version
2 and Conduction Cooled Version 2.
All
TI-1 thru TI-5 Updated for Revision 4. All
SBL-1 Added SB JETWAVE-23-0002, Rev 3 and SB
JETWAVE-23-0003, Rev 0.
All
1-2 Revised nomenclature in Paragraph 3 for all part numbers.
Added MCS 8250 Class A Modman Version 2, KANDU Version
2 and Conduction Cooled Version 2.
All
1-3 Updated Paragraph 1.5.B. to show the latest Honeywell
template information.
All
1-4 Updated CAGE code website address to
https://cage.dla.mil/search.
All
Draft as of 31 May 2017