User's Manual Part 1

Page 1-2
3 Mar 2017
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
Figure 1-1. Symbols
D. Units of Measure
(1) Measurements, weights, temperatures, dimensions, and o
ther values are expressed in the
USMS followed by the appropriate SI metric units in parentheses. Some standard tools or
parts such as drills, taps, bolts, nuts, etc. do not have an equivalent.
E. Illustration
(1) Supplemental illustrations use a suffix
number to the basic figure number. For example, if
Figure 501-5 is used, it signifies that it is an illustration of the item identified by index number
5 in Figure 501.
(2) Illustrations with no specific designation
are applicable to all units.
1.2 Scope
This manual provides detailed information for avionics technicians about the wiring and installation of
every component of the JetWave™ System. The installer is responsible for the approval and certification
of system components on the aircraft, and for the installation of wiring in the aircraft.
1.3 Part Numbers
This manual applies to the JetWave™ System components described below:
• 90401028-001 - JetWave™ System MCS 8200 Class A Forced Air KRFU
• 90401028-002 - JetWave™ System MCS 8200 Class A Conduction Cooled KRFU, Version 1
• 90401028-003 - JetWave™ System MCS 8200 Class A Conduction Cooled KRFU, Version 2
• 90406164-001 - JetWave™ System MCS 8250 Class A Modman, Version 2
• 90406164-XXX- JetWave™ System MCS 8250 Class A KANDU, Version 2
• 90406164-XXX- JetWave™ System MCS 8250 Class A Conduction Cooled KRFU, Version 2
• 90401027-001 - JetWave™ System MCS 8000 Class B Forced Air KRFU
• 90401027-002 - JetWave™ System MCS 8000 Class B Conduction Cooled KRFU, Version 1
• 90401027-003 - JetWave™ System MCS 8000 Class B Conduction Cooled KRFU, Version 2
• 90401027-004 - JetWave™ System MCS 8000 Class A Conduction Cooled KRFU, Version 2, FMA
Draft as of 31 May 2017