User's Manual Part 1

Page TI-6
3 Mar 2017
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
4-41 Paragraph 4-11, revised “Variant 1” as “Variant 2” in the step
referring to Figure 4-26.
All
4-41 Paragraph 4-11, added reference to new Figure 4-24.
All
4-43 Paragraph 4.11, added note stating that the Fuselage Mount
Radome is offered as a standard part with varying skirts to the
step referring to Figure 4-32.
All
4-55 and 4-56
Figure 4-24, add new figure for APM Outline and Installation
Drawing.
All
4-63 thru 4-71
Figure 4-27, updated to the latest engineering drawing. All
4-82 thru 4-101
Figures 4-31 and 4-32, updated to the latest engineering
drawings.
All
4-106 thru 4-143
Figures 4-34 thru 4-37, updated to the latest engineering
drawings.
All
5-1 Paragraph 5.1A, added a new step for the APM system
configuration minimum. Revised to add “or if all of the LRUs are
not at the same software release level, then”.
All
5-1 Paragraph 5.1B, revised to add “unless APM configuration
does specify other port / IPs settings”.
Paragraph 5.1C, revised the maintenance port data.
All
5-2 Paragraph 5.1C, revised Title from “Procedure” to “Overview”
and the maintenance port data.
All
5-2 Paragraph 5.1C, revised Step (2) as per SB
JETWAVE-23-0002 and SB JETWAVE-23-0003.
All
5-4 Paragraph 5.1D, revised Title from “Setup of 615A Data Loader
Application (AIT Flight Simulyzer v3.0.0)” to “Procedure (AIT
Flight Simulyzer v3.0.0)”.
All
5-15 Paragraph 5.1, Step D.(3)(s), revised the step stating to refer to
the applicable SB.
6-1
Paragraph 6.1, revised the step for “Satellite Search”.
Added a new bullet for GoGo for distribution partners.
All
Table of Highlights (Continued)
Page Description of Change Effectivity
Draft as of 31 May 2017