User Manual Part 3

Page 3-24
16 Sep 2015
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
Figure 3-15. Calibrate Transmit Cable Status Page
G. ARINC 615 Data Load
Do the data load as detailed in ARINC 615A Software Dataload Process section. Make sure that
the data load operation is completed successfully.
H. System Available (Cockpit Control Panel) Output
Once the JetWave™ system is powered up, monitor the “System Available” status discrete. Make
sure that the discrete state agrees with the discrete output in the GUI.
I. Data Link Available (Control Panel) Output
Once the network connectivity is achieved, the “Datalink Available” discrete output on the ARINC
791 page will be asserted.
To see the “Datalink Available” discrete output, navigate to the AES Summary and Link Status page
and scroll down to see the ARINC 791 page and make sure the discrete output status is asserted,
Refer to the Discrete I/O state page Figure 3-12.
Make sure the “Datalink Available” status is indicated in control panel.
J. Network Status
Navigate to the AES Summary and Link Status page and scroll down to see the Network status of
the JetWave™ system.
An example of a AES network status is shown in Figure 3-16.